PS6270
$1,495.00

Phat shaft 62 for the Dodge Cummins 12 Valve 1994 to 1998. Supports 332 - 550hp and can be upgraded to 64 or for a new Dodge 62mm extended tip compressor inside a performance compressor housing. Quick spool turbine housing with dual oversized wastegate passages. The Phat shaft comes with high speed dual grooved bearings for longer life. Low back pressure turbine wheel attached to a Phat Shaft. The HX40 downpipe and clamp are required for installation....

PS628024
$1,495.00

Phat shaft 62 for the Dodge Cummins 24 Valve 1998.5 to 2002. Supports 325 - 550hp and can be upgraded to 64 or for a new Dodge 62mm extended tip compressor inside a performance compressor housing. Quick spool turbine housing with dual oversized wastegate passages. The Phat shaft comes with high speed dual grooved bearings for extreme duty. Low back pressure turbine wheel attached to a Phat Shaft. The HX40 downpipe and clamp are required for installation....

PS648024
$1,795.00

Phat shaft 64 for the Dodge Cummins 24 Valve 1998.5 to 2002. Supports 350 - 575hp and can be upgraded for a new Dodge. 64mm extended tip compressor inside a performance compressor housing. Quick spool turbine housing with dual oversized wastegate passages. The Phat shaft comes with high speed dual grooved bearings for extreme duty. Low back pressure turbine wheel attached to a Phat Shaft. The HX40 downpipe and clamp are required for installation

PS6280CR
$1,495.00

Phat shaft 62 for the Dodge Cummins 24 CR Valve 2003 to 2006. Supports 350 - 550hp and can be upgraded for more horse power. 62mm extended tip compressor inside of a one piece performance compressor housing. Quick spool turbine housing with dual oversized wastegate passages. The Phat shaft comes with high speed dual grooved bearings for extreme duty. Low back pressure turbine wheel attached to a Phat Shaft. Comes ready to mount to the stock exhaust elbow and is a drop in replacement for the 6 Speed transmissions. NOTE: Turbo comes with all install components; however, a Boost Fooler is needed if truck is a 2004.5 or newer. The HX40 downpipe and clamp are required for installation on trucks with the automatic transmission.

PS6480CR
$1,795.00

Phat shaft 64 for the Dodge Cummins 24 CR Valve 2003 to 2006. Supports 350 - 600hp and can be upgraded for more horse power. 64mm extended tip compressor inside of a one piece performance compressor housing. Quick spool turbine housing with dual oversized wastegate passages. The Phat shaft comes with high speed dual grooved bearings for extreme duty. Low back pressure turbine wheel attached to a Phat Shaft. Comes ready to mount to the stock exhaust elbow and is a drop in replacement for the 6 Speed transmissions. NOTE: Turbo comes with all install components; however, a Boost Fooler is nneded if truck is a 2004.5 or newer. The HX40 downpipe and clamp are required for installation on trucks with the automatic transmissions

PS6680CR
$1,695.00

Phat shaft 66 for the Dodge Cummins 24 CR Valve 2003 to 2006. Supports 370 - 650hp and can be upgraded for more horse power. 66mm extended tip compressor inside of a one piece performance compressor housing. Quick spool turbine housing with dual oversized wastegate passages. The Phat shaft comes with high speed dual grooved bearings for extreme duty. Low back pressure turbine wheel attached to a Phat Shaft. Comes ready to mount to the stock exhaust elbow and is a drop in replacement for the 6 Speed transmissions. Note: Turbo comes with all install components; however, a Boost Fooler is needed if truck is a 2004.5 or newer. The HX40 downpipe and clamp are required for installation on trucks with the automatic transmissions.

 

SPS6680CR
$1,795.00

Super Phat shaft 66 for the Dodge Cummins 24 CR Valve 2003 to 2006. Supports 400 - 700hp and can be upgraded into a twin setup. 66mm extended tip compressor inside a one piece performance compressor housing. Quick spool turbine housing with dual oversized wastegate passages. The Phat shaft comes with high speed dual grooved bearings for extreme duty. Custom low back pressure turbine wheel attached to a Phat Shaft. Comes ready to mount to the stock exhaust elbow and is a drop in replacement for the 6 Speed transmission NOTE: Turbo comes with all install components; however, a Boost Fooler is needed if truck is a 2004.5 or newer. The HX40 downpipe and clamp are required for installation on trucks with the automatic transmissions

PSSILBUL3
$2,200.00

Silver Bullet for the Dodge Cummins 24 Valve CR 2003 to 2006. The Silver Bullet was designed for big horse power and to minimize surge. It is capable of supporting 800+ HP. It features a 66mm extended tip compressor and a quick spool turbine housing with dual oversized wastegate passages. Comes with a one pice compressor housing and a quick spool turbine housing with dual oversized wastegate passages. The Silver Bullet also features high speed dual grooved bearings for extreme duty. Custom low back pressure turbine wheel attached to a Phat Shaft. Comes ready to mount to the stock exhaust elbow and is a drop in replacement for the 6 Speed transmission NOTE: Turbo comes with all install components; however, a Boost Fooler is needed if truck is a 2004.5 or newer. The HX40 downpipe and clamp are required for installation on trucks with the automatic transmissions.

SPS62803
$1,795.00

Super Phat shaft 62 for the Dodge Cummins 24 CR Valve 2003 to 2006. Supports 400 - 700hp. 62mm extended tip compressor inside a one piece performance compressor housing. Quick spool turbine housing with dual oversized wastegate passages. The Phat shaft comes with high speed dual grooved bearings for extreme duty. Custom low back pressure turbine wheel attached to a Phat Shaft. Comes ready to mount to the stock exhaust elbow and is a drop in replacement for the 6 Speed transmission NOTE: Turbo comes with all install components; however, a Boost Fooler is needed if truck is a 2004.5 or newer. The HX40 downpipe and clamp are required for installation on trucks with the automatic transmissions

PSSILBUL2
$2,200.00
 

Silver Bullet for the Dodge Cummins 24 Valve 1994 to 2002. The Silver Bullet was designed for big horse power and to minimize surge. It is capable of supporting 800+ HP. It features a 66mm extended tip compressor and a quick spool turbine housing with dual oversized wastegate passages. The Silver Bullet also comes with high speed dual grooved bearings for extreme duty but what makes the Silver bullet unique is its one of a kind custum design turbine. NOTE: Turbo comes with all install components; however, the HX40 downpipe and clamp are required for installation.

SPS62802
$1,795.00

Super Phat shaft 62 for the Dodge Cummins 24 Valve 1994 to 2002. Supports 400 - 700hp. 62mm extended tip compressor. Quick spool turbine housing with dual oversized wastegate passages. The Phat shaft comes with high speed dual grooved bearings for extreme duty. Custom low back pressure turbine wheel attached to a Phat Shaft. NOTE: Turbo comes with all install components; However, the HX40 downpipe and clamp are required for installation.

DODGE

NEW 16CM UPGRADE non-wastegated TURBINE HOUSING FOR 1988-2002 DODGE/CUMMINS
$155.00
For H1C model Holset turbos
This is a simple and inexpensive upgrade that provides a lot of performance for your dollar. By replacing the 21cm2 or 18cm2 on your truck, you will increase boost, low end performance as well as horsepower on your stock 1988-1993 truck. This is a simple bolt-on change. No modifications are required.
You can also install this housing on 1994-2002 HX35W equipped trucks to replace the wastegated turbine housing that comes stock. BUT it will require moving the downpipe just over an inch forward. This housing will reduce backpressure and should reduce exhaust temperatures on these trucks.
*When installing this housing on 99 and newer HX35W trucks, you should purchase the angled exhaust outlet adapter supplied by Cummins in order to ease installation.*
This housing WON'T fit 2000 and newer automatic transmission trucks because they use a Holset HY35 turbo and not the HX35.
Specify the application you want to use this housing on and ask us about mounting flange and oil drain gaskets.

HOLSET HX40W and new SUPER 40 upgrade turbos.
Unlike many turbos sold out of the box, we make the necessary modifications so these turbos fit. The exhaust outlet is 4" and not 3" so we can also provide a downpipe for the 2nd generation trucks. The Super 40 has a redesigned 7-blade compressor and turbine wheel. The shaft is the same size but the assembly is precision balanced as an assembly with the compressor.
Price is $950.00

HOLSET new Pro 52 turbos.
This turbo is not a bolt on upgrade. It is for competition. It requires an exhaust inlet adapter ($195) to bolt it to your manifold. and it has a 4 9/16 exhaust outlet that you will have to get your exhaust attached to. This turbo has a compressor inducer measuring approx. 71mm and a 16cm2 NON-wastegated turbine housing. It looks like a good strong turbo. Price is $1435.00

T H E   O R I G I N A L   H T B 2
Often imitated - Never duplicated

Our HTB turbo series features strong, large shaft, extended tip compressor turbos for aftercooled Dodge Cummins engines.
With a 4" exhaust system, free-flowing air box and fuel enough to burn, 350-625 HP is the comfort range for these turbos.
Since the introduction of these turbos in July 2003, our HTB line-up has featured extremely durable and responsive chargers. Even after the initial quick spool-up, our HTB turbos build boost even quicker than other hybrid turbos so that there is plenty of boost at low-end, for towing and, well, for sheer fun. The result is minimal smoke as well as even lower EGT's.  We offer 4 compressor choices culminating in the 66mm inducer of Sled Puller. You have a choice of two different high-flow wastegated turbine housing set-ups as well. You can get great spool-up. You can get drive pressures down to 1:1 ratio at 45 lbs boost.

AN IMPORTANT FACTOR TO CONSIDER WITH YOUR TURBO PURCHASE IS INEXPENSIVE UPGRADABILITY. WE DON'T WANT YOU TO GROW OUT OF YOUR TURBO IN 6 MONTHS.
Our turbos can grow right along with your horsepower needs. When you send in your HTB2 or HTB2/64, we will upgrade the compressor to the next step up for only $150. When you send in your HTBG, we will upgrade the compressor to the next step up for only $500.This way you can't go wrong. Your don't have to purchase a turbo that is too big for you and you don't have to risk getting one too small.
***A note about compressor choices - Our 62 compressor is the best choice for all around streetability/towing. The 64 and 66 compressors are primarily competition compressors. Approximately 10 % of our customers have witnessed excessive "surging" issues under wider range of driving conditions.***
We also offer turbine housing upgrades. Often we can take your HTB 12cm2 turbine housing in trade for a 14cm2 housing (or 14 for 12) for just $200.00. Also, we can often machine the outlet flanges to different styles.

NEW High Tech 71 Series Turbochargers

UNMATCHED CUSTOMER SERVICE - WHEN YOU WANT MORE THAN JUST HOT AIR

High Tech Turbo is proud to announce the new High Tech 71 Series. Our unique partnership with Borg Warner Turbo Systems (THE OFFICIAL TURBO OF THE DHRA) prompts the evolution of our product line for 1991-2006 Dodge Cummins engines (adaptable to 1988-90 also). Along with Borg Warner’s race proven large shaft and our High Tech bearing and oiling system, these turbos combine the many improvements we have made since the inception of the HTB2 turbo line:

1. Improved oil drain tube clearance.
2. Our twin-ported wastegate now provides up to 50% more wastegate flow. This results in better boost control for single turbo applications as well as twin setups.
3. Our adjustable boost pressure regulators utilize higher spring rates supporting higher pressures.
   These actuators employ our new "Easy-Adjust" feature.
4. Borg Warner Low Drive Pressure turbine wheels. AKA, the “Killer Wheel” (71mm instead of the 65mm HTB2 wheel).
5. Factory 1-Year warranty.

The initial spool-up of these turbos might be slightly slower than out HTB2 series turbos but since the turbine wheels are low drive pressure design, they then build boost faster, offering you quicker acceleration.
These turbos should also provide a couple hundred degrees cooler EGT's under heavy acceleration and heavy loads like towing.

Like our HTB2 turbos, this series uses high torque, extended tip compressors = 62mm/87, 64mm/92, 66mm/96. (Alternate compressor sizes are for comparison to Garrett Powermax advertised compressor sizing.)

“Super Stock 62”      +300 HP - 475-575 HP 1100 ft. lbs. torque
$1670 2nd gen
$1695 3rd gen
“Quick Diesel 64”     +350 HP - 525-575 HP 1200 ft. lbs. torque
$1770 2nd gen
$1795 3rd gen
“Pro Street 66”           +450 HP - 575-675 HP 1350 ft. lbs. torque
$1870 2nd gen
$1895 3rd gen
 

Attaching hardware (nuts, bolts, studs and gaskets) included where needed.

2003-2006 – No downpipe required. (High Tech flange matches stock exhaust outlet)
1994-2002 – 4” downpipe required. $180 w/both clamps.
1991-1993 – 4” adapter pipe and clamp (only) available. $83.00

 

 

FORD

Drop-in replacement
 

FEATURES:
*Ported shroud compressor housing for flow increases exceeding 30%. The 88mm compressor wheel provides similar flow to the Garrett ball-bearing turbo.
*1.00 T. Hsg. instead of the stock .84. (For lower drive pressures and extended top-end horsepower.)
*The baseline actuator setting is 20 lbs. and is fully adjustable.
*360 degree thrust bearing and a shaft shank diameter of 5/16" in diameter instead of original 1/4". This gives you the strength and durability you need.
With the proper intake, exhaust and fuel mods, this turbo should reduce EGT's on hard pulls as compared with stock.
As a turbocharger remanufacturer, the best thing about this turbo is that it cost much less down the road when it comes to repairs.
With this turbo you get the air you need as well as decent spool-up.

 

Price is $1340 with intake hose and clamp.
We require a $150.00 refundable core deposit. Late 1999-2003 cores and ball-bearing turbo cores are acceptable.

 

Garrett Ball-Bearing Powerstroke Turbo - Late 99-2003 7.3

*Large ported shroud compressor with a 88mm compressor for flow increase of exceeding 30%.
*1.00 T. Hsg. instead of the stock .84. (For lower drive pressures and extended top-end horsepower.)

*We also offer 1.00 wastegated turbine housing options and 1.15 non-wastegated housing options for your stock late 1999-2003

7.3 as well as for the Garrett Ball-bearing turbo – as well as replacement ball-bearing CHRA assemblies.
 

 

We offer ball-bearing CHRA upgrade for your stock late 99-2003 7.3
as well as 1.00 wastegated turbine housing options and 1.15 non-wastegated housing options for your stock late 99-2003 7.3.

We offer performance aftermarket Powerstroke compressor wheels to minimize midrange noise and surge on 7.3 liter 99-2003 Ford. Similarly known as "Wicked Wheels", these wheels feature a "lowered vane" design which increases and improves flow throughout the rpm ranges. Customers tell us that these wheels not only reduce surge and improve all around performance, they also help lower EGT's
$85.00

We offer performance aftermarket Powerstroke turbine housings for your 95-97
These housings are relatively easy to change. (And since the turbine housing bolts often come loose on these turbos, it gives you an opportunity to head off more major problems before they occur.)
Your stock turbo is probably equipped with a 1.15 A/R turbine housing. We can supply you with a
1.00 A/R housing that will improve bottom-end response and increase boost.
$150.00.

A .84 non-wastegated housing is also available that will give you even more of the above benefits but it will create more exhaust restriction and reduce ultimate horsepower potential at the top end of your RPM ranges. But if you your main concern is simply low-end performance then this option is available for only $150.00.

 

CHEVY/GMC DURAMAX

THE HIGH TECH PROMAX high performance turbo replacement kit

Upgrade your stock Duramax turbo.
This turbo also outflows BD's Duramax upgrade kit.

2001-2004 LB7 $3095
2005 LLY $3195